The main contractor for the MOO project – SPCCC-JV – appointed us to carry out field airborne sound insulation tests (i.e. soundproofing) for compliance testing of the Vox auditoriums at Mall of Oman prior to handover. We carried out the tests at the shell and core stage, i.e. before installation of finishes. The consultant (AECOM) […]
We were contacted by M/s. CLV Consulting from Ireland to carry out the measurements on their behalf. They could not travel to Muscat at the time due to ongoing coronavirus-related restrictions. We took noise measurements at many points in the old airport – both outside and inside. This was mainly for them to estimate the […]
We were appointed to evaluate the existing interior design and provide recommendations to achieve the desired acoustics for the room. After taking into consideration the requirements of the client, the acoustic treatment was designed to perform best for the purpose of the hall. Perforation design for the acoustic wall panels were altered to increase the […]
We were appointed by M/s Hot Impact Engineering and Construction L.L.C. to test and estimate the performance of their installations. General testing methods employ Impedance tubes or reverberation chambers to estimate the NRC values of a typical type of installation. As per the request of the contractors and the unique nature of this project (in-situ, […]
We were appointed by M/s. L&T Electromech to test the insulation performance of a translator room partition due to complaints of leakage. We tested the partition and provided solutions to rectify the issue. The solutions were implemented by the contractor and the clients were satisfied with the results. Additionally, we designed the partitions for another […]
We were appointed to estimate the insulation performance of the partitions installed in the offices and to provide solutions to reduce leakage of airborne sound. We worked along with M/s CPEC (Center Point Engineering Consultancy) for their project at Said Al Shahry Law Offices (SASLO) building. Tests were carried out as per ISO standards to […]